Skip to content

Process

How a custom board is made

Six stages, one approval point, and a maker's eye on every design before a tool touches timber.

  1. Step 01

    Design

    Choose your board, add engraved text, and place resin inlays. Save as many versions as you like to your account.

  2. Step 02

    Manufacturability review

    A maker inspects every uploaded artwork: minimum line weight, inlay channel depth, detail size, and how the design sits against the grain.

  3. Step 03

    Proof & approval

    You receive a rendered proof with any recommended adjustments. Nothing is machined until you approve it.

  4. Step 04

    Artwork preparation

    Your approved design becomes a millimetre-accurate artwork file — position, scale and outlines only. Cutting depth, tooling and machine settings are set separately by a maker in the workshop.

  5. Step 05

    Inlay & hand finishing

    Resin is poured and cured, then everything is levelled, sanded and eased by hand.

  6. Step 06

    Oil, cure & ship

    Boards are oiled with food-safe finish, rested, photographed and packed for insured, tracked delivery.

Both faces work

Cut on either face — the back is best for heavy chopping

Engraving, lettering and resin inlay are cut into the front face only. That is the side you serve charcuterie from, or leave on the bench as a keepsake. The reverse is left plain, oiled Merbau. The design face is food-safe and flush, so light cutting there is fine — but for regular chopping, flip the board over and let the plain side take the knife marks.

  • Front — engraved lettering, artwork and resin inlay, poured and levelled flush and food-safe; light cutting is fine.
  • Reverse — plain Merbau, no inlay and no engraving; the face we recommend for chopping.
  • Both faces — sanded through the grits, eased at the edges and finished with food-safe oil and beeswax.

Ready when you are

Start with a blank board

Typical lead time is 10–15 business days from approved proof.

Design your board